Posts for tag: Crib
A new baby needs a lot of things. From bottles and car seats to high chairs and baby monitors, an expectant parent has a lot of decisions and purchases to make before baby’s arrival. Considering your baby will spend a great deal of time here, a crib is one of the most important things a parent will buy.
Whether you’re shopping for a brand new crib or receiving a hand-me-down from a relative or friend, remember to evaluate your baby’s resting place carefully to ensure it meets all of the safety guidelines. You can visit the Consumer Product Safety Commission (CPSC) website for information regarding all of these important safety standards.
There are many types of cribs available today, and parents will want to be educated about safety features and guidelines before choosing one for their baby. Here are a few helpful tips from the AAP:
- Make sure the crib meets current safety standards before purchasing it. As of June 28, 2011, new federal safety standards prohibit the manufacture or sale of drop-side rail cribs. The standards also require stronger hardware and increased durability.
- If you have a crib that was manufactured before the new safety standards were enacted, contact the manufacturer to see if they offer hardware to keep the drop side from being raised or lowered. Consider buying a new crib that meets the stronger standards, if possible.
- Read and follow the directions carefully for setting up, using and caring for the crib.
- Regularly inspect your crib’s screws and hardware, and tighten them as necessary.
- The mattress should fit snugly in the crib to prevent the baby from slipping between the mattress and the crib sides. As a general rule, no more than two of your fingers should fit between the mattress and the side of the crib.
- Do not use the crib if there are any missing, damaged, or broken parts, and never substitute original parts with pieces from a hardware store. Always contact the crib manufacturer for replacement materials.
- Be sure to inspect every crib your child uses—from grandma’s house to the day care center—for safety.
- Visit the US Consumer Product Safety Commission website to see if your crib has been recalled.
- The slats of the crib should be no more than 2 3⁄8 inches apart, as widely spaced slats can trap the infant.
- All surfaces of the crib should be covered with lead-free paint, and the wood should be smooth and free of splinters.
- If the crib has a drop-side or drop-gate, it should have a locking latch that will not release unexpectedly.
Remember, your baby will spend many hours in his or her crib. Take special care to ensure that your baby’s sleeping place offers very little opportunity for injuries and problems. You can learn more about crib safety standards, as well as safe bedding practices by visiting www.healthychildren.org and www.cpsc.gov, or by contacting your Edison pediatrician for more information.